Resene Lustacryl Cool Colour
Waterborne semi-gloss enamel paint
Please note delivery orders are currently restricted to the metro areas of Brisbane, Sydney and Melbourne
This paint comes in cool colour. View cool colour
Try our calculator
Get an idea of how much paint you'll need to complete your project.
- How much paint do I need?
You will need:
This is an indication only, actual paint quantity may vary.
This is an indication only.
If you know the measurements of the room or surface you want to paint you can use the calculator provided to give an approximate volume of paint required for your job.
However if you do not have exact measurements the following guide will give you the typical amounts of paint needed to complete your job.
The Average kiwi room will require 3-4 Litres of paint (assuming 2 coats) for the walls. As it will cost more to buy 1 x 2L & 1 X 1L cans we recommend purchasing 1 x 4L can of paint, this will also eliminate the need to intermix the two small cans for colour consistency. If it is a large room such as an open plan kitchen or living area, you will often find the actual wall areas are small, with kitchen cupboards and windows accounting for much of the space. You may need more than 4L if it is a very large room or a room with a high stud (heights of up to 3.2 metres).
A typical room will generally use 4 Litres of paint (2 coats); if you are painting multiple ceilings, a 10L pail should be enough to paint 3 to 4 rooms. Ceilings are much easier to estimate, simply multiply the length by width and input the metres squared (m2) into our calculator for a more accurate estimate.
If Painting windows, doors & trim in 1 room you will likely need at least 1 litre of paint. Painting the windows, internal doors & trim of an average home will require between 6 to 8 litres of paint, however this is very hard to estimate due to the variables involved. We recommend 500ml for small painting jobs such as some shelves or a couple of windows or a single door.
Suitable for use in kitchens, bathrooms, laundries and on trim and joinery. May be used wherever solventborne enamels have traditionally been used.
Resene Lustacryl is the result of long, careful, intensive research. This breakthrough product may be used in all those areas traditionally reserved for solventborne enamels. Non-yellowing and fast drying with easy water clean up
Typical uses: Architraves, bathrooms, furniture, kitchens, laundries, plywood, skirtings, timber doors, wallboards, window frames.
Environmental Choice approved
In hot summer conditions a Resene CoolColour will help keep the coating, substrate and surface cooler, which can help to minimise heat transference inside. A secondary benefit is that the reduced stress on the coating and substrate will help to increase the expected lifetime of each compared to a standard version of the same colour.
Resene CoolColour technology performs optimally on dark colours that are the most prone to heat build-up, which makes it ideally suited for dark roofing and wall colours. Resene CoolColour technology doesn't promise to resolve all issues related to heat, but will help to reduce the impact of dark colour selection.
For more information visit http://www.resene.co.nz/comn/whtsnew/cool_colours.htm
|Cool colour||Is cool colour|
|Interior / Exterior||Interior|